Dekton Mastidek Cartridge Glue is a bi-component adhesive used to glue Cosentino Dekton.
Dekton Mastidek Fast indoor/outdoor is officially approved by Cosentino and is included on the Cosentino product list. Mastidek is the ONLY cartridge glue that is approved by Cosentino for both indoor and outdoor use and is the only cartridge glue that carries the Dekton logo because this was developed by Cosentino Spain.
Mastidek has a very high adhesion in a short amount of time which allows for cutting and polishing the assembled parts in a short time. The hardened product is very shiny and very polishable. The glue and hardener are recolored in the cartridge with the Cosentino approved color match. The Dekton Mastidek Cartridge glue requires the use of a 2:1 cartridge gun such as the M200XMR Cartridge Gun.
Mastidek has been fully tested to withstand 15 years outdoors with zero yellowing.
Directions for Use:
All surfaces must be cleaned and free of dust and grease. When applying to a polished or glossy surface it is advised to scrub the surface with sandpaper before gluing. Remove cap and attach the special threaded mixing nozzle. Squeeze out about 2-3″ of product before applying to surface. Clean the nozzle after use, replace the cap and discard the mixing nozzle. Repeat this process at any change of mixer. After usage, clean the nozzle, replace the cap and discard the mixer after. Product will not set below 32°.