Alpha Professional Tools Electroplated Drill Bits
- Designed for Drilling Holes in Tile and Stone for Pre-Installation or Post-Installation Placement
- Works Great On Marble, Granite, Engineered Stone, Ceramic, Porcelain and Glass Tile and Panels
- Can Be Used On A Standard 3/8” or Larger Drill
- Can Fit On Water-Fed Polishers with 5/8”-11 Spindles Using The Drill Bit Adapter
- Ideal for Drilling Holes for Anchors for Bathroom Fixtures, Faucet and Plumbing Pipes
- Available in 3/16”, 1/4”, 5/16”, 3/8”, 1/2”, 1-3/8” and 1-1/2” Sizes
- A Must–Have for The Tile Installer’s Tool Box
- Wet Use Only
Baicchi Portable Drill Press
The “Baicchi” Portable Drill Press is designed to hold any variable speed drill. (Drill not included)
Diamant-D Diamond Drill Bit
- 5/8″-11 Female Thread.
- For Wet Use Only.
Diamax “Cyclone” Wet/Dry Diamond Bits
DIAMAX CYCLONE WET/DRY CORE BIT 5/8″-11 FEMALE THREAD
Italian Craftsman Adapters
To adapt 5/8″-11 threaded angle grinder to 1/2 gas threaded core bits
For conventional routers to adapt shaping bits with 22mm flange
To Adapt 1/2″ Straight Shaft To 5/8-11″ Male Thread
Weha RockPecker Diamond Core Bits
Weha RockPecker Diamond Core Bits are wet diamond core bits that have a free cutting bond and design to quickly drill holes in granite, marble, quartz, engineered stone, quartzite, cultured marble, limestone, travertine, and other stones.
These thin wall core bits, with only a 2mm thick diamond rim, will “bite” into the stone quickly and drill fast through the stone.
These wet diamond core bits are made with a special bond that favors the hardness of quartz materials, along with the resin that they are made with, to drill very fast and very clean.
The RockPecker Diamond Core Bits come in a large variety of sizes for drilling any hole needed.
- Wet only
- 2mm thick rim
- Total length: 3 3/8″ (85mm)
- Drilling depth: 2″ (50mm)
- 5/8-11 thread
Recommended RPM: between 1800-4500 rpm
WEHA Water Containment Ring
Use suction water rings to keep core drills cool
Eleminate dust in the home
Simply press the water ring down on the stone to create suction
Add water inside the ring
The water will keep the core bit cool and absorb the dust while drilling
1 1/2″ & 3″diameter
WEHA Weramic 5/8-11 Thread Core Bit
Weramic Porcelain Ceramic Core Bit for Dekton, Lapitec, Neolith, and other large format Porcelain Panels
Weha Weramic Porcelain and Ceramic Core Bit Specifications:
Wet or dry on material up to 6mm material
Wet only for material thicker than 6mm
Total length: 3 1/8″
Drilling depth: 1 7/8″
Recommended RPM: between 1600-2800 rpm