Glaxs Polar White – P

Glaxs Polar White Instructions for Use:

1. All the surfaces to be treated must be cleaned and free of dust and grease.
2. In case of glossy and/or smooth surfaces, we suggest to scrub the surfaces with sandpaper before gluing.
3. Remove the threaded extremity and uncap the cartridge.
4. Fix the mixer to the cartridge through the threaded nozzle.
5. Before applying the glue on the surfaces, do spurge around 5 gr in line.
6. Use only guns approved by Tenax, MK Sulzer ratio 2+1 H236M and Mixpac DM200-01 ratio 2+1.
7. After usage, clean the nozzle, replace the cap and discard the mixer after use. Product will not set below +1°C.