How to use it
Ready to use, no dilution necessary. On a dry and clean surface, apply an even, generous coat of MP90 with a paintbrush or lambswool applicator.
Let sit for 10 minutes, then wipe and rub the surface to allow any excess product to completely penetrate or be removed.
The surface may be used for normal foot traffic after 8 hours.Full cure and maximum sealer protection is achieved in 24 hours.
coverage
1 GAL (3.78 L)
- Polished stone ›1200 sq.ft. (112 m2)
- Polished porcelain tile ›1200-1600 sq.ft. (112-152 m2)
- Natural finish stone ›400-800 sq.ft. (36-76 m2)
- Coverage rates are indicative and per coat.