Weha Counter Top Support Brace Set of 3

Concrete Bracket Features

Additionally 12 2″ wood screws also come with this set of 3 stone support braces. This gives you 4 screws per counter top brace bracket. Each set of 3 Concrete countertop support braces are shrink wrapped with the screws for convenience. This allows the installer to grab a set and take it to the install without scratching the braces or the braces sliding around in the truck, and not having to remember to grab the screws. Simply take into the kitchen, open the pack, and everything is provided for a quick, scratch free install.

Each Concrete Countertop Support Brace bracket comes with 6 countersink holes. The provided screws will finish flush with the support brace. Each Counter Top Support Brace Bracket is powder coated gloss black for a high end black polished finish.

One edge of the counter top brace is flat and the other end is back beveled with slightly rounded corners. There are no sharp edges for the homeowner to scratch or cut themselves. And the bevel provides a nice touch transition from the bracket to the stone.

Weha also decided to go with a full 1/4″ thick counter top brace bracket. The 3/16″ brackets are just too flimsy and allows too much flex in the brace. However, the 1/4″ thick counter top bracket provides a solid stiff bracket that will fully support the overhang without flexing.

Weha produces the Counter Top Support Bracket at 2 1/2″ wide. This width gives plenty of structural support. And when placed at seams it gives a full 1 1/4″ wide support on each piece of stone.